Zebra Technologies 105S Benutzerhandbuch
Zebra S-Series User’s Guide
39
yØÃAÏÍAcÍ
AOÃAÏ
2SWLRQ6ZLWFKHV
These switches are located at the rear of
the printer above the Signal Interface
Cable Connection. See Figure 16.
the printer above the Signal Interface
Cable Connection. See Figure 16.
In the tables on the following page, an
“R” means the switch is OFF
(positioned to the right), while an “L”
means the switch is ON (positioned to
the left). All switches are in the OFF
position when the printer is shipped
from the factory.
“R” means the switch is OFF
(positioned to the right), while an “L”
means the switch is ON (positioned to
the left). All switches are in the OFF
position when the printer is shipped
from the factory.
Figure 16
Figure 17