Siemens PC 670 Benutzerhandbuch
Fault Diagnosis
Release 04/02
6-3
Panel PC 670 Computing Unit, Equipment Manual
6.2
External Screen Remains Dark
Cause/Remedy
The following causes are possible:
Monitor is switched off
S
Switch on the screen.
Screen has been dimmed
S
Press any key on the keyboard.
Brightness control set to dark
S
Set the screen brightness control lighter. Please refer to the monitor operating
manual for more detailed information.
manual for more detailed information.
Power cable or monitor cable not connected
S
Switch the monitor and computing unit off.
S
Check that the power cable is properly connected to the monitor and to the
computing unit or a grounded shockproof socket.
computing unit or a grounded shockproof socket.
S
Check that the monitor cable is properly connected to the computing unit and
monitor (where a plug is available).
monitor (where a plug is available).
S
Switch the monitor and computing unit on.
Note
If the monitor screen remains dark following these checks and corrective
measures, contact the technical service department.
measures, contact the technical service department.