Toshiba satellite a20 series Benutzerhandbuch

4.12 Wireless LAN Card

4 Replacement Procedures

4.12 Wireless LAN Card

Removing the Wireless LAN Card

To remove the wireless LAN card, make sure the computer is in boot mode and powered off,
follow the steps below and refer to figures 4-19 and 4-20.

NOTE: The wireless LAN card is an option in some models. This computer supports two
types of wireless LAN (802.11/b or 802.11a/b combo). In this section, removing/installing
a wireless LAN card for a/b combo model is described for example.

CAUTION: Do not try to remove the wireless LAN card with the computer turned on.
You can damage the computer or the wireless LAN card. Do not touch the connectors on
the wireless LAN card module on the computer. Debris on the connectors may cause
wireless LAN card access problems.

1. Turn up the keyboard insulator.

2. (For a/b combo models)

Remove the following screw securing the wireless LAN card cover.

• M2×4 LH STICK screw

×1

×4 LH STICK screw

Wireless LAN card cover

Keyboard insulator

Figure 4-19 Removing the Wireless LAN card cover

Satellite A20 Maintenance Manual (960-444)

4-37