Havis-Shields C-TCB-26 Merkblatt

 

C-TCB-26_INST_9-07 

TOOLS REQUIRED: 
  Torx Bit Set (T-55) 

3/16” Allen wrench 
3/8” Standard Socket Set 
3/8” Metric Socket Set 

3/8” Ratcheting Wrench 
Powered drill 
3/16” & 5/16” Drill bits 
Open-end wrench set 

 
 

1 

Pole support assembly 

CM93071-26W 

1 

Telescoping pole assembly  

CM93072-1 

1 

Side support brace 

CM93135 

1 

5/16” Nylock nut 

GSM30017 

2 

5/16” Flat washer 

GSM31006 

1 

5/16-18 x 1” Hex head bolt 

GSM33012 

2 

¼” x ¾” Hex head lag bolt 

GSM33060-1

 

 

 Read all instructions before installing any Havis-Shields Equipment Corp products. 
 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! 
 Use hardware provided with install kit 

 

Location of factory 

seat bolts 

Side support 

brace 

Pole support 

assembly 

Telescoping 

pole assembly