Havis-Shields C-TCB-26 Merkblatt

C-TCB-26_INST_9-07

SUB ASSEMBLY:

1. Confirm receipt of all hardware and components.
2. Remove front inner and outer passenger seat bolts on vehicle.

INSTALLATION:

1. MOUNT TELESCOPING COMPUTER BASE:

• Position pole support assembly on top of passenger seat base mount and align holes in

pole support assembly with holes in seat base.

• Loosely attached factory seat bolts that were removed during subassembly.

• Loosely mount side support brace to threaded rod located on pole support assembly

using a 5/16-18 Nylock nut

• Mount side support brace to vehicle using ¼” x ¾” Hex head lag bolts. A 3/16” pilot

hole is required.

Note: When mounting side support brace to floor of vehicle, be sure to check for obstructions prior to

drilling or lag bolting to floor.

•

Tighten down factory passenger seat bolts and 5/16-18-nylock nut holding side
support brace to pole support assembly.

• Mount optional C-3090, computer-mounting platform, to telescoping pole assembly

using hardware and instructions provided with C-3090.