Nortel Networks BCM1000 Benutzerhandbuch
Chapter 2 Telephony hardware
37
Installation and Maintenance Guide
Trunk media bay modules
You install the trunk media bay modules in the BCM1000 or the BCM1000e. Trunk media bay
modules connect telecommunications lines to the Business Communications Manager hardware.
modules connect telecommunications lines to the Business Communications Manager hardware.
These are determined by:
•
which lines are available from your telephone service provider
•
what lines you require for the types of telephones you want to use
•
budget considerations
lists the types of trunk media bay modules that are available for the Business
Communications Manager system:
Table 3 Trunk media bay modules
Module type
What it does
Special notes
DTM
Connects digital public switched
telephone lines to the Business
Communications Manager system.
telephone lines to the Business
Communications Manager system.
Can connect to four types of lines: TI,
NA PRI, ETSI (in UK only), and Euro
PRI.
NA PRI, ETSI (in UK only), and Euro
PRI.
CTM
CTM8
Connects a maximum of four analog
public switched telephone lines to the
Business Communications Manager
system.
public switched telephone lines to the
Business Communications Manager
system.
Connects a maximum of eight analog
public switched telephone lines to the
Business Communications Manager
system.
public switched telephone lines to the
Business Communications Manager
system.
Only available for North American
systems.
systems.
See also
BRI
Connects a maximum of four ISDN
BRI interfaces
BRI interfaces
GATM (Global Analog Trunk
Module
(introduced with BCM 3.5
software, but is backward
compatible)
Module
(introduced with BCM 3.5
software, but is backward
compatible)
Connects either four (GATM4) or eight
(GATM8) analog public switched
telephone lines to the Business
Communications Manager system.
(GATM8) analog public switched
telephone lines to the Business
Communications Manager system.
Only North America, Taiwan, UK and
Australia are supported. Modules
installed in BCM 3.5 and newer systems
can be set to automatically download
firmware from the Business
Communications Manager. This allows
for firmware updates, as required.
Australia are supported. Modules
installed in BCM 3.5 and newer systems
can be set to automatically download
firmware from the Business
Communications Manager. This allows
for firmware updates, as required.