3com PSE2500-A3 Benutzerhandbuch

User Manual 
PSE2500-A3 External PoE 
Power System 

Chapter 4  Installation and

 Debugging

 

4-4 

 

Figure 4-1 Physical installation 

Standalone rectifier is installed by sliding into the power bracket, 

pushing until the rectifier is fully inserted, and closing the handle on 

the rectifier. 

1) 

Verify that the AC circuit breakers in the distribution module 

are in the “OFF” position  

2)  Place the module in the bracket and slide it toward the 

backplane until it contacts the backplane  

3)  Close the handle on the front of the rectifier and verify that 

the rectifier is firmly seated. 

See Figure4-2 for the rectifier installation.