Compaq 4103TH Benutzerhandbuch

5-8 N

EED

 S

OME

 H

ELP

?

 

 

 

M

Y

 P

RESARIO

—G

ETTING

 S

TARTED

Diskette drive light stays on.

Diskette drive cannot save 
information to diskette.

Diskette drive cannot read a 
diskette.

Diskette has been 
improperly inserted.

Remove the diskette and reinsert it as follows: 
Insert the edge with the sliding cover into the 
drive, face up, and push all the way in until the 
diskette stops.

Diskette is damaged.

Remove the diskette and insert a new diskette. If 
a problem persists, run the Windows 
Maintenance Wizard to repair the drive:

1. From the Windows taskbar, click the Start 

button.

2. Point to Programmes, then Accessories, 

then System Tools, and then click 
Maintenance Wizard.

3. Select Perform maintenance now.
4. Click OK.

Diskette is not 
formatted.

To format the diskette:

1. On the Windows desktop, double-click the 

My Computer 

g

 

icon.

2. Select the diskette (A) drive. 
3. Click File, and point to Format.
4. Select the desired options, and click Start to 

begin formatting the diskette.

Diskette is 
write-protected.

Slide the write-protection tab to the unlocked 
position on the diskette.

Diskette is full or file is 
too big.

Use another diskette or compress the file to 
reduce the size.

File save command not 
properly executed.

When saving information to the diskette drive, 
verify that you are using the correct drive letter.

Diskette is damaged.

Replace the damaged diskette.

Diskette drive has 
failed.

Call Compaq Technical Support. Refer to your 
Certificate of Warranty for details.

Diskette is not 
formatted.

To format the diskette:

1. On the Windows desktop, double-click the 

g

 icon.

2. Select the diskette (A) drive.
3. Click File, and point to Format.
4. Select the desired options, and click Start to 

begin formatting the diskette.