Netgear L3 Benutzerhandbuch

Switching Commands

7-77

This command sets an ordered list of methods in the authentication login list. The maximum 
number of authentication login methods is three. The possible method values are local, radius, and 
reject. 

The value of local indicates that the user’s locally stored ID and password are used for 
authentication. The value of radius indicates that the user’s ID and password will be authenticated 
using the RADIUS server. The value of reject indicates that the user is never authenticated. 

To authenticate a user, the authentication methods in the user’s login will be attempted in order 
until an authentication attempt succeeds or fails. 

Note: The default login list included with the default configuration can not be changed.

 

 

This command assigns the authentication login list to use for nonconfigured users for 802.1x port 
security. This setting is overridden by the authentication login list assigned to a specific user if the 
user is configured locally. If this value is not configured, users will be authenticated using local 
authentication only. 

This command assigns the specified authentication login list to the specified user for port security. 
The <user> must be a configured <user> and the <listname> must be a configured login list. 

This command adds the specified user to the list of users with access to the specified port. The 
<user> must be a configured <user> and the <port> must be a valid port. By default, a user is given 
access to all ports.