3com WX3000 Benutzerhandbuch
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
1-5
Configuring a MAC Address Entry
You can add, modify, or remove a MAC address entry, remove all MAC address entries concerning a
specific port, or remove specific type of MAC address entries (dynamic or static MAC address entries).
You can add a MAC address entry in either system view or Ethernet port view.
Adding a MAC address entry in system view
Follow these steps to add a MAC address entry in system view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Add a MAC address entry
mac-address { static | dynamic |
blackhole } mac-address interface
interface-type interface-number vlan
vlan-id
blackhole } mac-address interface
interface-type interface-number vlan
vlan-id
Required
z
When you add a MAC address entry, the port specified by the interface argument must belong to
the VLAN specified by the vlan argument in the command. Otherwise, the entry will not be added.
z
If the VLAN specified by the vlan argument is a dynamic VLAN, after a static MAC address is
added, it will become a static VLAN.
Adding a MAC address entry in Ethernet port view
Follow these steps to add a MAC address entry in Ethernet port view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type interface-number
—
Add a MAC address entry
mac-address { static | dynamic |
blackhole } mac-address vlan vlan-id
blackhole } mac-address vlan vlan-id
Required
z
When you add a MAC address entry, the current port must belong to the VLAN specified by the
vlan argument in the command. Otherwise, the entry will not be added.
z
If the VLAN specified by the vlan argument is a dynamic VLAN, after a static MAC address is
added, it will become a static VLAN.