3com WX3000 Manuel D’Utilisation

 

1-5 

You can add, modify, or remove a MAC address entry, remove all MAC address entries concerning a 

specific port, or remove specific type of MAC address entries (dynamic or static MAC address entries). 

You can add a MAC address entry in either system view or Ethernet port view. 

Follow these steps to add a MAC address entry in system view: 

Enter system view 

— 

Add a MAC address entry 

mac-address { static | dynamic | 
blackhole } mac-address interface 
interface-type interface-number vlan 
vlan-id 

Required 

 

z 

When you add a MAC address entry, the port specified by the interface argument must belong to 

the VLAN specified by the vlan argument in the command. Otherwise, the entry will not be added. 

z 

If the VLAN specified by the vlan  argument is a dynamic VLAN, after a static MAC address is 

added, it will become a static VLAN. 

 

Follow these steps to add a MAC address entry in Ethernet port view: 

Enter system view 

— 

Enter Ethernet port view 

interface interface-type interface-number

 

— 

Add a MAC address entry 

mac-address { static | dynamic | 
blackhole } mac-address vlan vlan-id

 

Required

 

 

z 

When you add a MAC address entry, the current port must belong to the VLAN specified by the 

vlan argument in the command. Otherwise, the entry will not be added. 

z 

If the VLAN specified by the vlan  argument is a dynamic VLAN, after a static MAC address is 

added, it will become a static VLAN.