3com WX3000 Benutzerhandbuch
2-1
2
VLAN Configuration
VLAN Configuration
Configuration Task List
Complete the following tasks to configure VLAN:
Task
Remarks
Required
Optional
Optional
Basic VLAN Configuration
Follow these steps to make basic VLAN configuration:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create multiple VLANs in
batch
batch
vlan { vlan-id1 to vlan-id2 |
all }
all }
Optional
Create a VLAN and enter
VLAN view
VLAN view
vlan vlan-id
Required
By default, there is only one VLAN, that
is, the default VLAN (VLAN 1).
is, the default VLAN (VLAN 1).
Assign a name for the
current VLAN
current VLAN
name text
Optional
By default, the name of a VLAN is its
VLAN ID. “VLAN 0001” for example.
VLAN ID. “VLAN 0001” for example.
Specify the description
string of the current VLAN
string of the current VLAN
description text
Optional
By default, the description string of a
VLAN is its VLAN ID. “VLAN 0001” for
example.
VLAN is its VLAN ID. “VLAN 0001” for
example.
z
VLAN 1 is the system default VLAN, which needs not to be created and cannot be removed, either.
z
The VLAN you created in the way described above is a static VLAN. On the switch, there are
dynamic VLANs which are registered through GVRP. For details, refer to “GVRP” part of this
manual.
z
When you use the vlan command to create VLANs, if the destination VLAN is an existing dynamic
VLAN, it will be transformed into a static VLAN and the switch will output the prompt information.