3com WX3000 Manuel D’Utilisation

 

2-1 

Complete the following tasks to configure VLAN: 

Basic VLAN Configuration 

Required 

Basic VLAN Interface Configuration 

Optional 

Displaying and Maintaining VLAN 

Optional 

 

Follow these steps to make basic VLAN configuration: 

Enter system view 

system-view 

— 

Create multiple VLANs in 
batch 

vlan { vlan-id1 to vlan-id2 | 
all } 

Optional 

Create a VLAN and enter 
VLAN view 

vlan vlan-id 

Required 

By default, there is only one VLAN, that 
is, the default VLAN (VLAN 1). 

Assign a name for the 
current VLAN 

name text 

Optional 

By default, the name of a VLAN is its 
VLAN ID. “VLAN 0001” for example. 

Specify the description 
string of the current VLAN 

description text 

Optional 

By default, the description string of a 
VLAN is its VLAN ID. “VLAN 0001” for 
example. 

 

z 

VLAN 1 is the system default VLAN, which needs not to be created and cannot be removed, either. 

z 

The VLAN you created in the way described above is a static VLAN. On the switch, there are 

dynamic VLANs which are registered through GVRP. For details, refer to “GVRP” part of this 

manual. 

z 

When you use the vlan command to create VLANs, if the destination VLAN is an existing dynamic 

VLAN, it will be transformed into a static VLAN and the switch will output the prompt information.