Enterasys Networks D2G124-12P Benutzerhandbuch

set port advertise

4-16 Port Configuration

Parameters

Defaults

If port‐string is not specified, advertisement for all ports will be displayed.

Mode

Switch command, read‐only.

Example

This example shows how to display advertisement status for Gigabit ports 13 and 14:

D2(su)->show port advertise ge.1.13-14
ge.1.13    capability advertised remote
-------------------------------------------------
10BASE-T     yes      yes    yes
10BASE-TFD   yes      yes    yes
100BASE-TX   yes      yes    yes
100BASE-TXFD yes      yes    yes
1000BASE-T   no       no     no
1000BASE-TFD yes      yes    yes
pause    yes      yes    no

ge.1.14    capability advertised remote
-------------------------------------------------
10BASE-T     yes      yes    yes
10BASE-TFD   yes      yes    yes
100BASE-TX   yes      yes    yes
100BASE-TXFD yes      yes    yes
1000BASE-T   no       no     no
1000BASE-TFD yes      yes    yes
pause    yes      yes    no

set port advertise

Use this command to configure what a port will advertise for speed/duplex capabilities in auto‐
negotiation.

Syntax

set port advertise {port-string}{10t | 10tfd | 100tx | 100txfd | 1000t | 1000tfd
| pause}

Parameters

port‐string

(Optional) Displays advertised ability for specific port(s). For a
detailed description of possible port‐string values, refer to “

Port

String Syntax Used in the CLI

” on page 4‐1.

port‐string

Select the ports for which to configure advertisements. For a detailed
description of possible port‐string values, refer to “