Enterasys Networks 6H3xx Betriebsanweisung

4. Press the SPACE bar to step to the appropriate Classification. 

 lists the 

subclassification associated with each Classification (examples of classifications: Ethernet II 
Type, 802.3 SAP, IP TOS, IP Protocol Type, etc.).

5. Use the arrow keys to highlight the subclassification field to the immediate right of the 

Classification field. The name of the field changes depending on the selected Classification, as 
shown in 

 (examples of subclassification: Ethernet II Type, SSAP/DSAP (803.2), Type 

of Service, IP Protocol Type, etc.).

6. Press the SPACE bar to step to the appropriate protocol. In some cases, there is only one 

selection and a value needs to be entered. This is indicated by bold zeros. 

possible selections associated with each subclassification (examples: IPX, AppleTalk,
NetBIOS, Banyan Vines, 000.000.000.000, 0x00000000, etc.).

7. In some cases, a selection in the subclassification field requires a value to be entered in a third 

field to the right of the subclassification field. If so, use the arrow keys to highlight that third 
field and type in the appropriate value. Otherwise, go to 

.

8. Use the arrow keys to highlight the ADD command field.

9. Press ENTER to save the PID and Classification settings. After a brief delay, the Classification 

Rule (PID, Classification, and Description) displays in the top half of the screen.

All, or one or more, line items can be deleted as follows:

To delete all configured Classification Rules, use the arrow keys to highlight the DEL ALL 
command field and press ENTER.

To delete one or more Classification Rules, mark each entry and then delete them, as follows:

1. Use the arrow keys to highlight a line to be deleted.

2. Press the M key and an asterisk (*) appears next to the highlighted line to mark it. The DEL ALL 

command is changed to DEL MARKED.

NOTE: After creating a classification rule you must assign it to the appropriate ports 
using the Protocol Port Configuration screen described in