Enterasys Networks 6H3xx Betriebsanweisung

To assign one or more ports, or all ports simultaneously, to a PID/Classification (Classification 
Rule), proceed as follows:

1. Use the arrow keys to highlight the Classify field adjacent to the Port number.

2. Press the SPACE bar to toggle the Classify field to either NO or YES. YES associates the port 

to the priority shown in the Classification Rule field.

3. If more than one port is being set, repeat the first two steps for each port.

4. Use the arrow keys to highlight the SAVE command at the bottom of the screen.

5. Press ENTER. The message “SAVED OK” displays and the settings are saved.

Port
(Read-Only)

See the number of each port.

Classify
(Toggle)

See which ports are set to the PID/Classification indicated in the 
Classification Rule field (see 

). The Classify field toggles 

between YES and NO, which determines whether or not the associated 
port is set to the Classification Rule.

NOTE: As each Classify field is highlighted, the Event 
Message Line (not shown) at the top of the screen indicates 
the port type. For example: Fast Ethernet Front Panel, FTM 
Backplane Port 3, and Gigabit Ethernet VHSIM.

If a port cannot be configured, “NO” displays without 
brackets.

For details about assigning ports, refer to 

.

SET ALL PORTS
(Toggle)

Toggle between YES and NO. This determines whether or not all ports 
will be assigned to the classification rule shown in the Classification 
Rule field. NO is the default. For details about setting all ports 
simultaneously, refer to 

.