Fujitsu FX1008MT Benutzerhandbuch

 

1. 

Remove the four flathead screws from the left and right sides of the switch device's console 
panel. 

2. 

Remove the console panel from the switch device, and attach the rack mount bracket (small) to 
it. (Use the screws that were removed in step 1.) 

3. 

Attach the rack mount bracket (large) to the rear panel side of the switch device with the 
flathead screws provided (six).   

4. 

Detach the console panel connector cable from the console panel before mounting it in the 
rack. This makes it easy to mount the switch device. 

5. 

Fix the console panel to the front side of the rack with screws.   

6. 

Fix the rear panel to the rear of the rack with the screws.   

7. 

Reattach the console cable (detached in step 4.) to the console panel.   

 

Rear Panel Side 

 

       

 

Console Panel Side 

 

 

Monitors the switch device's power supply for correct voltage. If the voltage is low, the POWER 
LED flashes (orange) indicating you need to check such things as whether the AC cord is 
connected or not.   

 

 

9