Meridian America 61 Benutzerhandbuch
3-22 Provisioning guidelines
Calculate number of PE cards required
Enter the number of
receivers required (from Worksheet B) at the
cutover, 2-year, and
interval on Worksheet D. Use a separate
worksheet for the cutover, 2-year, and 5-year intervals.
Using the information on Worksheet A, enter the number of
TN, SL-1 TN, and trunk TN required at the
cutover, 2-year, and
interval (for all customers).
Divide each entry by the number of terminal number assignments per card,
round up to the next highest figure, and total the number of cards required.
round up to the next highest figure, and total the number of cards required.
Calculate the number of new cards and old cards separately.
Worksheets are provided at the end of this document.
Calculate number of PE
required
The number of PE
provided at cutover is based on the
estimate of PE cards required and an 85% utilization level. The maximum
capacity of an Intelligent Peripheral Equipment (IPE) Module is 256
capacity of an Intelligent Peripheral Equipment (IPE) Module is 256
Integrated Voice and Data (IVD) or analog lines; however, a typical
configuration should include a combination of line, trunk, and
receivers which provides up to 160 lines with appropriate trunks.
configuration should include a combination of line, trunk, and
receivers which provides up to 160 lines with appropriate trunks.
Divide the number of PE cards required at 2-years by 8.5, round to the next
higher figure, and enter this value on Worksheet D (at the end of this
document).
higher figure, and enter this value on Worksheet D (at the end of this
document).
To compute the number of Peripheral Equipment
total the
number of line cards, trunk cards, and
receiver cards required at 2
years by 13.6 and round to the next higher integer figure. Enter this value
into Worksheet D (located at the end of this document).
into Worksheet D (located at the end of this document).
Calculate the number of
and PE
required.
System engineering