Meridian America 61 Benutzerhandbuch

Provisioning guidelines 3-23

Tone and Digit Switch 

 and Conference 

 loops are

provisioned according to the two-year figure for the number of network
loops required. All systems should be equipped with a minimum of two
TDS and two CONF loops.

Refer to Table   10 (at the end of this document) to determine TDS and
CONF loop requirements for systems other than SL-1 S. Enter these figures
on Worksheet F (at the end of this document).

Refer to the end of this document and use Worksheets G through 

calculate memory needs. The two-year figure for sets, consoles, trunks, for
example, should be used when calculating. Once the total memory needs
are determined, add an additional 10% to the total.

Equipment summary

Use Worksheet J (at the end of this document) to record the equipment
requirements for the complete system at cutover. Proceed to assign 
equipment. The equipment summary may have to be updated as a result of
assigning procedures. The equipment summary, once finalized, may be
used to order the equipment for the system.

System engineering 553-3001-l 51