Zalman ZM-2HC2 Benutzerhandbuch

* The specifications of any product may change without prior notice to improve the performance thereof. 

10. Installing the HDD Cooler in the Case 

Install the 4 Dampers in the holes on the bottom side of the HDD. Insert the thread of one of

the dampers through the ground wire’s round terminal for the ground. [Refer to arrow C]

5

Slide  the  completed  assembly  into  the 

PC’s 5.25-inch drive bay and firmly fasten

with  4  B-Type  Bolts.  Use  one  of  the 

B-Type  Bolts  to  link  the  ground  wire’s 

Y-terminal to the chassis. [Refer to arrow B]

Note) Tighten the B-type bolts enough so

that they are firm, but do not cause

distortion of the dampers.

B-Type 
Bolt

C

Damper

Ground Wire

B