Справочник Пользователя для Zalman ZM-2HC2
![Zalman](https://files.manualsbrain.com/attachments/7833ff1d64b20774318a0ec39cd2309e1a516c14/common/fit/150/50/d85e6c8453cd6d2c1cae27b08b04782ede21e356e45740e0dbb056f91026/brand_logo.jpeg)
* The specifications of any product may change without prior notice to improve the performance thereof.
10. Installing the HDD Cooler in the Case
1) Install the Dampers & the Ground Wire
Install the 4 Dampers in the holes on the bottom side of the HDD. Insert the thread of one of
the dampers through the ground wire’s round terminal for the ground. [Refer to arrow C]
5
2) Install into 5.25-inch Drive Bay
Slide the completed assembly into the
PC’s 5.25-inch drive bay and firmly fasten
with 4 B-Type Bolts. Use one of the
B-Type Bolts to link the ground wire’s
Y-terminal to the chassis. [Refer to arrow B]
Note) Tighten the B-type bolts enough so
that they are firm, but do not cause
distortion of the dampers.
B-Type
Bolt
Bolt
C
Damper
Ground Wire
B