Sun Microsystems X4100 Benutzerhandbuch

Chapter 1

Setting Up the Server Hardware

4. Simultaneously pull and hold the slide rail release buttons on each mounting

bracket while you push the server into the rack. See

Continue pushing until the slide-rail locks on the front of the mounting brackets
engage the slide-rail assemblies.

Caution –

Verify that the server is securely mounted in the rack and that the slide-

rails locks are engaged with the mounting brackets before continuing.

Installing the Cable Management Assembly

Use this procedure to install an optional cable management assembly (CMA).

1. Unpack the CMA parts.

2. Take the CMA to the rear of the equipment rack and ensure that you have

adequate room to work around the rear of the server.

Note –

References to “left” or “right” in this procedure assume that you are facing

the rear of the equipment rack.

3. Locate the CMA rail extension and insert it into the left slide-rail until the

extension locks into place with an audible click. See

FIGURE 1-5

Inserting the CMA Rail Extension Into the Rear of the Left Slide-Rail

CMA rail

extension

Left slide-rail