Acer G700 series Benutzerhandbuch
3 Upgrading the system
32
3
Open the system according to the instructions on page 33.
4
Follow the ESD precautions described in this section when
handling a server component.
handling a server component.
5
Remove any expansion board(s) or peripheral(s) that block access
to the DIMM socket or other component connector.
to the DIMM socket or other component connector.
See the following sections for specific installation instructions on the
component you want to install.
component you want to install.
Warning! Failure to properly turn off the server before you
start installing components may cause serious damage. Do
not attempt the procedures described in the following
sections unless you are a qualified service technician.
start installing components may cause serious damage. Do
not attempt the procedures described in the following
sections unless you are a qualified service technician.
Post-installation instructions
Observe the following after installing a server component:
1
See to it that all components are installed according to the
described step-by-step instructions.
described step-by-step instructions.
2
Reinstall any expansion board(s) or peripheral(s) that you have
previously removed.
previously removed.
3
Reinstall the air baffle.
4
Reinstall the chassis panels.
5
Connect the necessary cables.
6
Turn on the system.
AA G701 - EN.book Page 32 Tuesday, February 25, 2003 5:19 PM