Acer G700 series Benutzerhandbuch
3 Upgrading the system
34
Note: The illustration below shows the Altos G701 server chassis.
Removing the side panel
1
Turn off the system and all the peripherals connected to it.
2
Unplug all cables from the power outlets.
3
Place the system unit on a flat, stable surface.
4
Remove the front bezel.
Refer to the preceding section for detailed instructions.
5
Loosen the three thumbscrews located at the end of the left panel
closest to the front panel (1). Keep them for later use.
closest to the front panel (1). Keep them for later use.
AA G701 - EN.book Page 34 Tuesday, February 25, 2003 5:19 PM