Gateway 7400 Benutzerhandbuch
Drives
35
Installing a 3.5-inch drive in a 5.25-inch drive
bay
bay
Additional 3.5-inch hard drives can also be installed in the server in the empty
5.25-inch drive bays. A 5.25-inch filler tray, three of which came installed in
your server, is required for this type if installation.
5.25-inch drive bays. A 5.25-inch filler tray, three of which came installed in
your server, is required for this type if installation.
To install a 3.5-inch drive in a 5.25-inch drive bay:
1
Turn off the system and disconnect the power cord, modem cord (if
installed), and all external peripheral devices.
installed), and all external peripheral devices.
2
Observe all safety and static electricity precautions. (See “Preventing static
electricity discharge” on page 22.)
electricity discharge” on page 22.)
3
Remove the bezel. (See “Removing the bezel” on page 25.)
4
5
Locate an available 5.25-inch drive bay.
6
Grip the mounting rails firmly with thumb and index finger and pull
the filler tray carefully straight out of the drive bay.
the filler tray carefully straight out of the drive bay.
7
Leave the mounting rails on the filler tray.
8508366.book Page 35 Tuesday, October 23, 2001 11:29 AM