Gateway 7400 Benutzerhandbuch
36
Replacing and Adding System Components
8
Remove the new hard drive from the static-free container and place it
in the filler tray with the top (label side) up and the connectors facing
away from the plastic face plate.
in the filler tray with the top (label side) up and the connectors facing
away from the plastic face plate.
9
Set the drive jumpers to the appropriate settings (refer to your drive
documentation for jumper settings.)
documentation for jumper settings.)
10
Install the drive in the filler tray with four screws (6-32 x 1/4-inch Phillips
head - not provided).
head - not provided).
8508366.book Page 36 Tuesday, October 23, 2001 11:29 AM