Citrix Systems 9.3 Benutzerhandbuch
Figure 1-32.
Citrix NetScaler MPX 7500/9500 (8x10/100/1000Base-T copper
Ethernet ports), front panel
The following figure shows the front panel of the MPX 7500/9500 (4x1G SFP +
4x10/100/1000Base-T copper Ethernet ports) appliances.
4x10/100/1000Base-T copper Ethernet ports) appliances.
Figure 1-33.
Citrix NetScaler MPX 7500/9500 (4x1G SFP + 4x10/100/1000Base-T
copper Ethernet ports), front panel
Depending on the model, the appliance has the following ports:
w
RS232 serial console port.
w
Two 10/100/1000Base-T copper Ethernet management ports, numbered 0/1 and 0/2
from left to right. These ports are used to connect directly to the appliance for
system administration functions.
from left to right. These ports are used to connect directly to the appliance for
system administration functions.
w
Network Ports
• MPX 7500/9500 (8x10/100/1000Base-T copper Ethernet ports). Eight
10/100/1000Base-T copper Ethernet ports numbered 1/1, 1/2, 1/3, and 1/4 on
the top row from left to right, and 1/5, 1/6, 1/7, and 1/8 on the bottom row
from left to right.
the top row from left to right, and 1/5, 1/6, 1/7, and 1/8 on the bottom row
from left to right.
• MPX 7500/9500 (4x1G SFP + 4x10/100/1000Base-T copper Ethernet ports). Four
1-gigabit copper or fiber 1G SFP ports numbered 1/1, 1/2, 1/3, and 1/4 on the
top row from left to right, and four 10/100/1000BASE-T copper Ethernet ports
(RJ45) numbered 1/5, 1/6, 1/7, and 1/8 on the bottom row from left to right.
top row from left to right, and four 10/100/1000BASE-T copper Ethernet ports
(RJ45) numbered 1/5, 1/6, 1/7, and 1/8 on the bottom row from left to right.
The following figure shows the back panel of the MPX 7500/9500 appliance.
Figure 1-34.
Citrix NetScaler MPX 7500/9500, back panel
Chapter 1
Introduction to the Hardware Platforms
44