GE GFK0579B Benutzerhandbuch
7
Series 90–70 Remote I/O Scanner User’s Manual – July 1992
106
Displaying Other Circuits
In monitor mode, the HHM will step through I/O modules in the following sequence:
1.
%I, all references used
2.
%AI, all references used
3.
%Q, all references used
4.
%AQ, all references used
To display additional circuits within the currently–selected memory type, press the F1
(>) key. The HHM will step through each available circuit.
(>) key. The HHM will step through each available circuit.
To jump directly to a particular device, memory type, or address, press F2 (ref). This
screen appears, to enter the desired information.
screen appears, to enter the desired information.
MNTR _
chng entr
1.
Enter the reference number. Press F3 (entr).
2.
If you want to select a different reference type (for example, to display %AQ
instead of %I), press F2 (chng) to toggle the memory type.
instead of %I), press F2 (chng) to toggle the memory type.
3.
With the desired information displayed, press F3 (entr) to monitor the circuit.