Polycom 2000/4000 Benutzerhandbuch
Chapter 16-RMX Manager Application
16-26
Disconnecting an MCU
An MCU can be disconnected from the RMX Manager, without removing
it from the MCUs list.
To disconnect an MCU:
1
To disconnect an MCU:
1
Use one of the following methods:
a
Select the MCU to disconnect and click the Disconnect MCU
button.
b
Right-click the MCU icon and then click Disconnect MCU.
The MCU icon changes to disconnected and any ongoing conference
running on that MCU will not be monitored in this RMX Manager;
they are removed from the Conferences pane. This MCU can still be
monitored and controlled by other users.
Removing an MCU from the MCUs Pane
An MCU can be removed from the RMX Manager. This function should
be used if the MCU hardware was disconnected and removed from the
network.
To Remove an MCU from the list:
1
To Remove an MCU from the list:
1
Use one of the following methods:
a
Select the MCU to disconnect and click the Delete
button.
b
Right-click the MCU icon and then click Remove MCU.
A confirmation message is displayed.
2
Click OK to confirm or Cancel to abort the operation.