Southbend SB1019 Benutzerhandbuch

For Machines Mfg. Since 8/09

Model SB1019

-11-

The items listed below are optional components 

and are not required for bandsaw operations. 

A.  Work Stop .......................................................1

B.  Work Stop Rod ...............................................1

This item was carefully packaged to prevent 

damage during transport. If you discover any 

damage, please immediately call Customer 

Service at (360) 734-1540 for advice. You may 

need to file a freight claim, so save the containers 

and all packing materials for possible inspection 

by the carrier or its agent.

Improper connection of the equipment-grounding 

wire can result in a risk of electric shock. The 

wire with green insulation (with or without 

yellow stripes) is the equipment-grounding wire. 

If repair or replacement of the power cord or 

plug is necessary, do not connect the equipment-

grounding wire to a live (current carrying) 

terminal.

 

Check with a qualified electrician or service 

personnel if you do not understand these 

grounding requirements, or if you are in doubt 

about whether the tool is properly grounded.

 

If you ever notice that a cord or plug is 

damaged or worn, disconnect it from power, and 

immediately replace it with a new one.

We do not recommend using an extension cord 

with this machine. If you must use one, only 

use it if absolutely necessary and only on a 

temporary basis.

Extension cords cause voltage drop, which may 

damage electrical components and shorten motor 

life. Voltage drop increases as the extension cord 

size gets longer and the gauge size gets smaller 

(higher gauge numbers indicate smaller sizes).

Any extension cord used with this machine 

must contain a ground wire, match the required 

plug and receptacle listed in the Circuit 

Requirements for the applicable voltage, and 

meet the following requirements: