Cisco Systems OL-6426-02 Benutzerhandbuch

 describes some of the fields shown in the command output.

Use the debug commands to troubleshoot configuration problems that you might be having on your 
network. The debug commands provide extensive, informative displays to help you interpret any 
possible problems. 

Read the following guidelines before using debug commands to ensure appropriate results.

All debug commands are entered in privileged EXEC mode.

To view debugging messages on a console, enter the logging console debug command.

Most debug commands take no arguments.

To disable debugging, enter the undebug all command.

To use debug commands during a Telnet session on your router, enter the terminal monitor 
command.

Debugging is assigned a high priority in your router CPU process, and it can render your router unusable. 
For this reason, use debug commands only to troubleshoot specific problems. The best time to use debug 
commands is during periods of low network traffic so that other activity on the network is not adversely 
affected.

You can find additional information and documentation about the debug commands in the

.

Use the debug atm errors command to display ATM errors. The no form of this command disables 
debugging output. 

 shows a sample output.

ATM interface

Interface number. Always 0 for the Cisco 1800 fixed-configuration routers.

AAL enabled

Type of AAL enabled. The Cisco 1800 fixed-configuration routers support AAL5.

Maximum VCs

Maximum number of virtual connections this interface supports.

Current VCCs

Number of active virtual channel connections (VCCs).

Maximum 
Transmit
Channels

Maximum number of transmit channels.

Max Datagram 
Size

Configured maximum number of bytes in the largest datagram.

PLIM Type

Physical layer interface module (PLIM) type.