Cisco Systems OL-6426-02 Benutzerhandbuch

interface FastEthernet8

 no ip address

 shutdown

!

interface FastEthernet9

 no ip address

 shutdown

!

interface Vlan1

 no ip address

!

ip classless

!

no ip http server

no ip http secure-server

!

control-plane

!

line con 0

line aux 0

line vty 0 4

!

no scheduler allocate

end

You need to gather some or all of the following information, depending on your planned network 
scenario, prior to configuring your network

If you are setting up an Internet connection, gather the following information:

Point-to-Point Protocol (PPP) client name that is assigned as your login name

PPP authentication type: Challenge Handshake Authentication Protocol (CHAP) or Password 
Authentication Protocol (PAP)

PPP password to access your Internet service provider (ISP) account

DNS server IP address and default gateways

If you are setting up a connection to a corporate network, you and the network administrator must 
generate and share the following information for the WAN interfaces of the routers:

PPP authentication type: CHAP or PAP

PPP client name to access the router

PPP password to access the router

If you are setting up IP routing:

Generate the addressing scheme for your IP network.

Determine the IP routing parameter information, including IP address, and ATM permanent 
virtual circuits (PVCs). These PVC parameters are typically virtual path identifier (VPI), virtual 
circuit identifier (VCI), and traffic shaping parameters.

Determine the number of PVCs that your service provider has given you, along with their VPIs 
and VCIs.

For each PVC determine the type of AAL5 encapsulation supported. It can be one of the 
following: