Cisco Systems OL-6426-02 Benutzerhandbuch

AAL5SNAP—This can be either routed RFC 1483 or bridged RFC 1483. For routed RFC 1483, 
the service provider must provide you with a static IP address. For bridged RFC 1483, you may 
use DHCP to obtain your IP address, or you may obtain a static IP address from your service 
provider.

AAL5MUX PPP—With this type of encapsulation, you need to determine the PPP-related 
configuration items.

If you plan to connect over an ADSL or G.SHDSL line:

Order the appropriate line from your public telephone service provider. 

For ADSL lines—Ensure that the ADSL signaling type is DMT (also called ANSI T1.413) or 
DMT Issue 2. 

For G.SHDSL lines—Verify that the G.SHDSL line conforms to the ITU G.991.2 standard and 
supports Annex A (North America) or Annex B (Europe).

Once you have collected the appropriate information, you can perform a full configuration on 
your router, beginning with the tasks in the 

 section.

To configure the router, perform one or more of these tasks:

A configuration example is presented with each task to show the network configuration following 
completion of that task.