Intel SERVER CHASSIS SR2500 SR2500 Benutzerhandbuch
Produktcode
SR2500
Peripheral and Hard Drive Sub-System
Intel® Server System SR2500AL
Revision – 1.00
Intel order number D31980-004
44
The USB floppy drive assembly includes a USB cable which plugs into the back of the USB
floppy drive and is then routed to the backplane’s 4-pin USB connector J2A1 (See Table 35.
USB Floppy Drive Connector (J2A1).
floppy drive and is then routed to the backplane’s 4-pin USB connector J2A1 (See Table 35.
USB Floppy Drive Connector (J2A1).
Note: The optional internal USB floppy drive accessory kit (product order code –
AXXUSBFLOPPY) includes a slim-line USB floppy drive, a USB cable, and mounting hardware
to install the drive into either the slim-line drive bay or one of the hard drive bays.
AXXUSBFLOPPY) includes a slim-line USB floppy drive, a USB cable, and mounting hardware
to install the drive into either the slim-line drive bay or one of the hard drive bays.
5.2 Hard Drive Bays
The chassis can be configured to support up to 6
1
hot-swap 3.5” x1” SAS or SATA hard disk
drives. Hard drives are mounted to hot-swap drive trays for easy insertion to or extraction from
the drive bay.
the drive bay.
5.2.1
Hot-swap Drive Trays
Each hard drive must be mounted to a hot-swap drive tray, making insertion and extraction of
the drive from the chassis very simple. Each drive tray has its own dual purpose latching
mechanism which is used to both insert/extract drives from the chassis and lock the tray in
place. Each drive tray supports a light pipe providing a drive status indicator, located on the
backplane, to be viewable from the front of the chassis.
the drive from the chassis very simple. Each drive tray has its own dual purpose latching
mechanism which is used to both insert/extract drives from the chassis and lock the tray in
place. Each drive tray supports a light pipe providing a drive status indicator, located on the
backplane, to be viewable from the front of the chassis.
TP02106
A
B
D
C
E
Figure 29. Hard Drive Tray Assembly
A. Hard Drive
B. Drive Carrier
C. Side Rail
D. Mounting Screw
E. Hard Drive Connector
1
Default 5 Hard Drives + one optional 6
Th
Hard Drive using Flex Bay