Intel SERVER CHASSIS SR2500 SR2500 Manual Do Utilizador

Intel® Server System SR2500AL 

 

The USB floppy drive assembly includes a USB cable which plugs into the back of the USB 
floppy drive and is then routed to the backplane’s 4-pin USB connector J2A1 (See Table 35. 
USB Floppy Drive Connector (J2A1).  

Note: The optional internal USB floppy drive accessory kit (product order code – 
AXXUSBFLOPPY) includes a slim-line USB floppy drive, a USB cable, and mounting hardware 
to install the drive into either the slim-line drive bay or one of the hard drive bays. 

The chassis can be configured to support up to 6

1

 hot-swap 3.5” x1” SAS or SATA hard disk 

drives. Hard drives are mounted to hot-swap drive trays for easy insertion to or extraction from 
the drive bay.  

Each hard drive must be mounted to a hot-swap drive tray, making insertion and extraction of 
the drive from the chassis very simple. Each drive tray has its own dual purpose latching 
mechanism which is used to both insert/extract drives from the chassis and lock the tray in 
place. Each drive tray supports a light pipe providing a drive status indicator, located on the 
backplane, to be viewable from the front of the chassis. 

TP02106

A

B

D

C

E

 

 

 

A.  Hard Drive 

 

 

B.  Drive Carrier 

 

 

C.  Side Rail 

 

 

D.  Mounting Screw 

 

 

E.  Hard Drive Connector 

                                                 

1

 Default 5 Hard Drives + one optional 6

Th

 Hard Drive using Flex Bay