Southbend SB1013 Benutzerhandbuch

-8-

For Machines Mfg. Since 7/09

EVS Toolroom Lathes

To complete the preparation process, you will 
need the following items:

For Lifting and Moving
s

!

s

,IFTING

 

(rated for at least 5000 lbs.)

s

Helper for moving machine.

s

Two 12" 2x6's

s

0RECISION

For Power Connection
s

!

For Assembly
s

Cotton Rags

s

Mineral Spirits

s

Quality Metal Protectant Oil

s

3AFETY

s

Wrench or Socket 21mm

s

Wrench or Socket 19mm

s

&LOOR

s

Standard Screwdriver #2

This item was carefully packaged to prevent 
damage during transport. If you discover any 
damage, please immediately call Customer 
Service at (360) 734-1540 for advice. You may 
need to file a freight claim, so save the containers 
and all packing materials for possible inspection 
by the carrier or its agent.

The purpose of the preparation section is to help 
you prepare your machine for operation. The 
list below outlines the basic process to follow to 
prepare the lathe for operation. Specific steps for 
each of these points will be covered in detail later 
in this section.

  Unpack the lathe and inventory the contents 

of the box/crate.

  Clean the lathe and its components.

  Identify an acceptable location for the lathe 

and move it to that location.

  Level the lathe and either bolt it to the floor 

or place it on mounts.

  Assemble the loose components and make 

any necessary adjustments or inspections to 
ensure the lathe is ready for operation.

  Connect the lathe to the power source.

  Test run the lathe to make sure it functions 

properly and is ready for operation.