Liebherr 7083 247-00 Benutzerhandbuch
22
Defrosting
The appliance defrosts automatically. The water that forms on the
rear wall drains into a reservoir at the back of the appliance and
evaporates automatically through the compressor heat.
Safety lock
The lock in the appliance door is
equipped with a safety mechanism.
Locking the appliance:
Locking the appliance:
• Insert the key as shown by arrow 1.
• Turn the key 90°.
To unlock the appliance, the same
To unlock the appliance, the same
procedure must be repeated in the
same order.
Cooling
The grid shelves can be moved
to accommodate different height
bottles or packages.
The ventilation slots of the
The ventilation slots of the
recirculating fan on the inside
must not be covered!
Interior light in appliances with glass door
The interior light is fitted on the inside at the top. Switch on switch S,
the interior light comes on.
Changing the tube:
Changing the tube:
Pull out the mains plug or remove/
unscrew the fuse.
• Lever out the cover panel ➀ on
• Lever out the cover panel ➀ on
the lamp housing at the front and
remove downwards.
• Turn the tube ➁ 90° and pull out
downwards. Insert a new tube and
turn 90°.
• Replace the cover panel ➀ by
inserting at the back and clicking
into place at the front.
If the interior light still does not work after you have changed the
bulb, please consult your nearest customer service point.
Setting the display indication for the defrost
phase
The following indications can be set for the defrost phase.
• Symbol
+ alternating display of
and the current tem-
perature in the interior of the appliance.
• Symbol
+ temperature before the start of the defrost phase
(factory setting).
• Symbol
+
.
Change the display during the defrost phase
Press
for 5 seconds. Display =
Display =
Display =
Display =
Display =
Display =
Use buttons
and
to select the desired setting.
= alternating display of
and the current temperature in the
interior of the appliance.
= temperature before the start of the defrost phase.
= display of
only.
Display =
Press
for 5 seconds.
The electronic control system will automatically switch back to
normal operating mode.