GE JGP630 Benutzerhandbuch

Install the LP/Propane orifices in their
precise locations as noted in the
illustrations above.

Return the natural gas orifices to the
bracket and reattach the bracket and 
the instruction sheet to the pressure
regulator using the screw removed
previously.

Replace the burner bases, heads, caps
and top grates. (NOTE: When re-attaching
the burner bases to glass top units,
tighten screws to a maximum of 
10 in.-lbs torque.)

JGP630

II

III

JGP963

III

X

JGP970

ZGU36K

Replace:

With:

JGP975

III

Main 206X 

N

➔ 108X L

Simmer

57N

➔ 34L

Locate the LP/Propane orifices shipped
inside the literature package. They 
will have a digit number and the letter
“L” on the side. (Important: Save the
orifices removed from the appliance 
for future use.)

Each orifice will show a series of
engraved marks, (I, II, III, X or none), 
located on the top. 

These marks denote the precise location of
each orifice to the cooktop burner.

NOTE: The main orifice is located low in the
center of the burner while the simmer orifice
is located higher behind the center of the
burner.

The 18,000 BTU/HR burner has two orifices
with markings located in the sides only.
(See rating plate on bottom of appliance).

I

II

III

X

Main orifice

Simmer
orifice