Blomberg DSM 9651 A+ Benutzerhandbuch

EN

14

• Stop your refrigerator by means of the 

temperature setting button or unplug 
the power cord from the outlet. You 
can place a container filled with hot 
water into the freezer compartment 
or leave the door of the freezer 
compartment open in order to hasten 
the defrosting. 

• Remove the water that accumulates 

in the lower container of the freezer 
compartment with an absorbent cloth 
or sponge. 

• Dry the freezer compartment 

completely and return the 
temperature setting button to its 
previous position. 

• Operate your refrigerator for 2 hours 

while it is empty and its doors are 
closed before replacing your food into 
the deep freezer.

Using the crisper humidity control 
sliders
Crisper of your refrigerator is designed 
specially to keep your vegetables fresh 
without loosing their humidity. Cold air 
circulates basically around the crisper 
and the amount of the cold air passing 
through the crisper is controlled by the 
sliders on the front side of the crisper 
cover. 
You can adjust the humidity control 
sliders to a suitable position according 
to the humidity and cooling condition 
of your food in the crisper. 
If you want your food in the crisper 
to cool more, open the holes of the 
humidity control sliders and if you 
want them to cool less and keep their 
humidity for a longer time, close the 
holes.

 If your thermostat is equipped with “0” 
position:
- Your product will stop operating 
when you turn the thermostat button 
to “0” (zero) position. Your product 
will not start unless to you turn the 
thermostat button to position “1” or 
one of the other positions again.
If your thermostat is equipped with 
“min” position:
- Unplug your product to stop it.