Hoshizaki DT-400BAH-OS Benutzerhandbuch
17
Fig. 8
Fig. 9
B. Cleaning and Sanitizing Instructions - Dispensing Components
Perform following the cleaning and sanitizing procedures for the water system.
1. Cleaning Solution
Dilute approximately 9.6 fl. oz. (0.29 l) of recommended cleaner, Hoshizaki "Scale Away"
or "LIME-A-WAY" (Economics Laboratory, Inc.), with 1.6 gallons (6.0 l) of warm water.
or "LIME-A-WAY" (Economics Laboratory, Inc.), with 1.6 gallons (6.0 l) of warm water.
2. Sanitizing Solution
Dilute approximately 0.82 fl. oz. (25 ml) of a 5.25% sodium hypochlorite solution
(chlorine bleach) with 1.6 gallons (6.0 l) of warm water.
(chlorine bleach) with 1.6 gallons (6.0 l) of warm water.
3. Dispensing Components Cleaning and Sanitizing Procedure
1) Move the control switch to the "OFF" position and remove the upper front and top
panels.
2) Move the power switch to the "OFF" position. Unplug the icemaker from the electrical
outlet.
3) Remove the front cover of the storage bin
4) Remove the thumbscrews, first from the vertical plane and then from the horizontal
4) Remove the thumbscrews, first from the vertical plane and then from the horizontal
plane of the motor brackets. Move the agitating motor and the dispensing motor
towards you. Then remove the agitator and the auger (ice dispensing). See Fig. 7.
towards you. Then remove the agitator and the auger (ice dispensing). See Fig. 7.
Fig. 7
5) Remove the bin control bracket assembly. See Fig. 8.
6) Remove the snap pin, shaft and actuator.
7) Remove the thumbscrews, spout and packing. See Fig 9.
6) Remove the snap pin, shaft and actuator.
7) Remove the thumbscrews, spout and packing. See Fig 9.