Hoshizaki KMS-1400MLH Benutzerhandbuch

11

1. Install in accordance with all applicable national, state, and local regulations.
2. Remove the shipping carton, tape, and packing material. If any are left in the 

icemaker or condensing unit, it will not work properly. 

3. Ensure all components, fasteners, and thumbscrews are securely in place 

after installation. 

1) Remove the panels to prevent damage when installing the icemaker. (See "II.C. How to   

Remove Panels.")

2) Remove the package containing the accessories.  
3) Remove the protective plastic film from the panels. If the icemaker is exposed to the 

sun or to heat, remove the film after the icemaker cools.

4) Check that the refrigerant lines do not rub or touch lines or other surfaces.
5) This icemaker can be installed on dispenser units or storage bins 30" wide or wider. If 

using a storage bin, the recommended storage bin is HOSHIZAKI ICE STORAGE BIN, 
Model B-500 series. For more options, contact your local Hoshizaki distributor.

6) 

1) See the nameplate on the condensing unit. Check that your voltage supplied 

corresponds with the voltage specified on the nameplate.

Electrical connections must be installed in accordance with applicable national, 
state, and local regulations.

2) Remove the panels to prevent damage when installing the condensing unit (See "II.C. 

How to Remove Panels.") 

3) Remove the package containing the accessories from the condensing unit.
4) Check that the refrigerant lines do not rub or touch lines or other surfaces, and that the 

fan blade turns freely.

5) Check that the compressor is snug on all mounting pads.