Vermont Casting DVBR36 Benutzerhandbuch

9

The DVBR36/42 fireplace is shipped as a rear vent unit. 
If the layout requires a top vent, convert the unit follow-
ing the steps below.

1.  Remove the eight (8) screws securing outer collar 

adapter to fireplace. (Be careful not to damage insu-
lation.) (Fig. 10)

2.  Set outer collar adapter aside.

DVT584-602

Outer Collar Adapter

Flue Pipe

3/11/99   djt

Flue Pipe

Remove 

Screws (4)

Outer Collar 

Adapter

Remove Screws (4)

DVT584-602

Fig. 10  Remove screws from outer collar adapter.

6.  Secure flue cover to back of flue outlet. Be sure to 

replace gasket. (Fig. 12)

7.  Install flue pipe to top of unit with four (4) screws. Be 

sure to replace gasket. (Fig. 12)

8.  Set insulation in back of unit foil side down.
9.  Secure outer collar adapter to unit with the round 

collar on top, secure with eight (8) screws.

NOTE: Be sure not to damage any gasket material.

3.  Remove insulation on top of collector box. (Fig. 11)
4.  Remove the four (4) screws securing flue cover to 

top of unit and remove flue cover. (Fig. 11)

5.  Remove the four (4) screws securing flue pipe to 

back of unit. Remove flue pipe. (Fig. 11)

DVT584-603

Outer Collar Adapter

Flue Pipe

3/11/99   djt

Insulation

Remove 

Screws (4)

Remove Screws 

(4)

Flue 

Cover

Flue 

Pipe

DVT584-603

Fig. 11 Remove flue cover and flue pipe.

DVT584-604

Outer Collar Adapter

Flue Pipe

3/11/99   djt

Flue 

Pipe

Foil Side

Replace 

Screws 

(4)

Insulation

Flue Pipe

DVT584-604

Fig. 12 Replace flue cover and flue pipe.

Replace 

Screws (4)

DVT584-605

Outer Collar Adapter

Flue Pipe completed

3/11/99   djt

DVT584-605

Fig. 13  Completed conversion.