Magnetek Quattro DC Elevator Drive Benutzerhandbuch

The Quattro DC drive is currently available 
with three different output currents and a 
variety of options.    

The enclosure options consist of a customer 
I/O panel and a side Dynamic Braking Resistor 
box.  The Dynamic Braking Resistor box is an 
optional box that is attached to the right hand 
side of the cabinet.  It is used to hold the 
dynamic braking resistors.  The customer I/O 
panel is an optional larger width cabinet that 
allows for customer interfacing within the 
supplied cabinet.  See Dimensions / Weights 
on page 104. 

 

The next option consists of shipping, either 
domestically or internationally.  Due to 
international standards, the shipping crate 
must be heat-treated.   
The final option section determines the type of 
motor contactor and Magnetek Operator.  The 
Magnetek Operator is not required to start 
running, but allows for easy access to 
parameters, overspeed test, and auto tuning.  

00 = No operator, ABB type 

Contactor 

01 = Operator, ABB type 

Contactor 

02 = No Magnetek Operator, 

Dual DC Contactor 

03 = Operator, Dual DC 

Contactor

 

1 = no customer I/O panel, no side DBR box 
2 = no customer I/O panel, side DBR box 
3 = customer I/O panel, no side DBR box 
4 = customer I/O panel, side DBR box 

125 = 125A output current
200 = 200A output current
250 = 250A output current

QDC 

     

1 0

1 = domestic 
2 = international 

11