HP (Hewlett-Packard) E200 Benutzerhandbuch
Diagnosing array problems 30
Diagnosing array problems
In this section
Controller board runtime LEDs.................................................................................................................. 30
Battery pack LEDs................................................................................................................................... 31
Diagnostic tools ..................................................................................................................................... 32
Battery pack LEDs................................................................................................................................... 31
Diagnostic tools ..................................................................................................................................... 32
Controller board runtime LEDs
NOTE: During server power-up, each runtime LED illuminates randomly until POST has finished.
LED ID
Color
LED name and interpretation
1 Green
CR1: Idle Task LED. This LED, together with item 2, indicates the amount of
controller CPU activity. For details, see the following table.
controller CPU activity. For details, see the following table.
2 Green
CR2: Gas Pedal LED. This LED, together with item 1, indicates the amount of
controller CPU activity. For details, see the following table.
controller CPU activity. For details, see the following table.
3 Green
CR3: Heartbeat LED. This LED blinks every two seconds to indicate the controller
health.
health.
4 Green
CR4: Command Outstanding LED. The controller is working on a command from
the host driver.
the host driver.
5
Green
CR5: DMA Activity LED.
6
Green
CR6: SAS Activity LED.
7 Amber
CR7: Drive Failure LED. A physical drive connected to the controller has failed.
Observe the Fault LED on each drive to determine which drive has failed.
Observe the Fault LED on each drive to determine which drive has failed.
8
Amber
CR8: Controller Lockup LED.