AEG PV.500-MH Benutzerhandbuch

Seite von 68
Protect PV.500-MH Operating Instructions 
68 of 68 
80000043212 BAL 
 
The default password set by the factory is: 1201. 
In menus where switching operations are normally possible, block-
ing is indicated by a key.  
8.3.6 Fault 
History 
You can call up the "Fault history" menu from the "Main menu". A 
data logger that records the inverter's fault history is integrated in 
the inverter unit. You can display the 20 most recent faults as of 
the current date or as of a specific date. 
8.3.7 Settings 
You can call up the "Settings" menu from the "Main menu". Here 
you can set the following parameters in the submenus: 
LCD contrast,    Language,    Real time and Acoustic signal gener-
ator for indicating faults and keyboard operation 
8.3.8 Information 
You can call up the "Information" menu from the "Main menu". Us-
ing this menu, you can call up information about the unit type, the 
firmware versions and the available communication options. 
8.3.9 Service 
You can call up the password-protected "Service" menu from the 
"Main menu". The password must be entered digit by digit and 
then confirmed by pressing the ENTER key.  
The default password set by the factory is: 1201. 
Once the current password has been entered, you can select a 
submenu where you can change the DOU password. 
  In the "Password" menu, you can set the password for block-
ing operation and for setting parameters. A range of 0000 to 
9999 is possible. 
 
Keep the password secure.  
If you have forgotten the password, the DOU will need to 
be reset at the customer's expense! 
 
8.3.10 Help 
You can call up the "Help" menu from the "Main menu" using the 
"?" key. This enables you to look up the meaning of the keyboard 
symbols. 
downloadlike
ArtboardArtboardArtboard