Blomberg IWD 1006 XT Benutzerhandbuch

Seite von 601
EN
16
3.  Take out the water filter by-pass cover 
by rotating it downwards. (Figure 3-4)
A
 Warning: Make sure that the “Ice off” 
mode is active before taking out the by-
pass cover. 
Note: It is normal that a few drops of 
water drip after the cover has been taken 
out.
4.  Remove the lid on top of the water filter 
to place it as shown in the figure and 
turn upwards to lock it. (Figure 5)    
5.  Press ice cancel button on the display 
again to exit from this mode.
Water filter should be replaced every 
6 months. The water filter must be 
removed as shown in the figure when it 
is going to be replaced or when it will no 
longer be used and by-pass cover must 
be attached. It must be made sure that 
Ice Off mode is active before taking it 
out.
A
 Warning: Water filter cleans some 
foreign particles in the water. It does not 
purify water from microorganisms.
A
 Warning: Ice Off button must always 
be pressed during replacement of the 
water filter or installing the by-pass 
cover.
3
1
4
2
5