Blomberg IWD 1006 XT Benutzerhandbuch

EN

19

C

 Water system of the refrigerator must 

be connected to the cold water line. It 
must not be connected to hot water line.

C

 No water may be obtained in the 

initial startup of the refrigerator. This 
is caused by the air in the system. To 
discharge air from the system, press 
Dispenser latch for periods of 1 minute 
until water comes from the Dispenser.  
Water flow may be irregular in the 
beginning. Irregular water flow will be 
normalized after the air in the system is 
discharged.

C

 At the initial startup of the refrigerator 

approx.12 hours must pass before cold 
water can be obtained.

C

 Water mains pressure must be 

between 1-8 bars for the operation of 
Ice/Water Dispenser smoothly. For this, 
check that 1 glass of water (100 cc) can 
be filled in 10 seconds.

C

 The first 10 glasses of water should 

not be consumed.

C

 12 hours must pass to obtain ice 

from the Ice Dispenser for the first time. 
If there is not enough ice in the ice 
dispenser, ice may not be obtained from 
ice dispenser.

C

 Approximately the first 30 cubes 

of ice to be obtained from the Ice 
Dispenser must not be used. 

C

 Always use the water filter when a jug 

is not being used.