Blomberg IWD 1006 XT Benutzerhandbuch

Seite von 601
EN
25
Sliding Body Shelves
Sliding body shelves can be pulled by 
slightly lifting up from the front and moved 
back and forth. They come to a stop point 
when pulled towards front to allow you 
reach the foods placed at the back of the 
shelf; when it is pulled after slightly lifting 
upwards at the second stop point, the 
body shelf will be released.
The shelf should be held tightly from the 
bottom as well in order to prevent it from 
tipping over. The body shelf is placed on 
the rails at the sides of the refrigerator body 
by bringing it to one lower or one upper 
level.
The body shelf should be pushed 
backwards to seat it completely.
1
2
3
4
Using the water spring
Warnings
It is normal for the first few glasses of 
water taken from the dispenser to be 
warm.
In cases where the water dispenser 
has not been used frequently, sufficient 
amount of water must be drained from 
the dispenser to get fresh water.
Spillage Tray
Water drops that drip during use, 
accumulates in the spillage tray. You 
can remove spillage tray by pulling it to 
yourself. You can remove the water with 
a sponge or a soft cloth.