Blomberg IWD 1006 XT Benutzerhandbuch

EN

27

• Prepacked commercially frozen food 
should be stored in accordance with the 
frozen food manufacturer’s instructions 
for a 

 ( 4 star) frozen food storage 

compartment.
• To ensure that the high quality 
achieved by the frozen food 
manufacturer and the food retailer is 
maintained, the following should be 
remembered:
1.Put packets in the freezer as quickly as 
possible after purchase.
2.Ensure that contents are labelled and 
dated.
3.Do not exceed “Use By”, “Best Before” 
dates on the packaging.
If there is a power failure do not open 
the freezer door. Even if the power failure 
lasts up to the time specified on Type 
Label (inside left of the refrigerator), 
frozen food will not be affected. In case 
the failure lasts longer, the food must 
be checked and when necessary, must 
be consumed immediately or must be 
frozen after cooked.

The fridge and freezer compartments 
defrost automatically.

Should the light fail to work, proceed as 
follows:
1. Switch off at the socket outlet and pull 
out the mains plug.
Remove all shelves and drawers for easy 
access.
2. Illumination covers in freezer and 
fridge sections are opened by pressing 
by hand; first release one side and then 
the other by pressing on the sides as 
shown in the figures.
3. First check that the bulb has not 
worked loose by ensuring that it 
is screwed securely in the holder. 
Reinsert the plug and switch on. If the 
bulb works, reinstall the light cover by 
inserting the rear lug and pushing up to 
locate the front two lugs.
4. If the light still fails to work, switch 
off at the socket outlet and pull out the 
mains plug. Replace the bulb with a new 
15 watt (max) screw cap E14 (SES) bulb.
5. Carefully dispose of the burnt-out light 
bulb immediately. 
Replacement light bulb can easily be 
obtained from a good local electrical or 
DIY store.