Bertazzoni A304GGVXE/02 Benutzerhandbuch

GAS CONVERSION

WARNING!

Before carrying out this operation, disconnect

the appliance from gas and electricity.

Gas conversion shall be conducted by a factory‐

trained professional.

Call the customer service hotline to identify a

factory‐trained professional near your home.

The gas conversion procedure for this range
includes 6 steps:

1. Pressure

regulator

2. Surface

burners

3. Main oven burner

4. Broiler

burner

5. Visual checks prior to closure of oven bottom

panel

6. Adjustment of minimum setting

The conversion is not completed if all 6 steps
have not been concluded properly.

Before performing the gas conversion, locate the
package containing the replacement nozzle
shipped with every range. IMPORTANT: Each
nozzle has a number indicating its flow diameter
printed on the body. Consult the table on page 20
for matching nozzles to burners.

Save the nozzles removed from the range for
future use.

STEP 1: PRESSURE REGULATOR

The pressure regulator supplied with the
appliance is a convertible type pressure regulator
for use with LP/Propane Gas at a nominal outlet
pressure of 11” w.c. or LP gas at a nominal outlet
pressure of 4” w.c. and it is pre‐arranged from
the factory to operate with one of these
gas/pressure as indicated in the labels affixed on
the appliance, package and Instruction booklet.

To convert the regulator for use with other
Natural gas:

1. Unscrew by hand the upper cap of the

regulator, remove the white plastic
attachment from the cap, reverse its
direction and screw it again firmly against the
cap. The white plastic attachment has arrows
indicating the position for LP gas (LP)and
natural gas (NAT).

2. Screw by hand the metal cap in the original

position on the regulator.